Feature
●One of the most important accessories of a lathe
●For securing long, thin and heavy workpieces
●Concentricity: max. 0.015 mm
●Steel tip, hardened and polished
●Point angle [°]: 60 | concentricity (max.) [mm]: 0.015 | Material base body: C45E tempered steel | Morse taper mount: MK4 | Material tip: 40Cr coating steel | Diameter tip [mm]: 28 | Speed (max.) [RPM]: 2,800 | Diameter bearing housing [mm]: 63.5 | Total length [mm]: 204
Description
The grain tip is double mounted and thus achieves a high concentricity of max. 0.015mm It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and life of this item. The tip angle of this grain tip is - as usual with grain tips - 60°.
Technical details:
Morse taper holder: MK4.
Tip angle [°]: 60.
Base body material: C45E hardening steel.
Tip material: 40Cr hardened steel.
Rotation speed (max.) [RPM]: 2,800.
Total length [mm]: 220.
Bearing housing diameter: 63.5.
Tip diameter: 28.
Concentricity (max.) [mm]: 0.015.
Tip length: 36.
|
|
|
|
|
|---|---|---|---|---|
| Paulimot running centre point MK1. | Paulimot running centre point MK2. | Paulimot running centre point MK3. | Paulimot running centre point MK4. | |
| Morse taper holder: | MK1. | MK2. | MK3. | MK4. |
| Tip angle [°]: | 60. | 60. | 60. | 60. |
| Base body material: | C45E hardening steel. | C45E hardening steel. | C45E hardening steel. | C45E hardening steel. |
| Tip material: | 40Cr hardened steel. | 40Cr hardened steel. | 40Cr hardened steel. | 40Cr hardened steel. |
| Rotation speed (max.) [RPM]: | 2,800. | 2,800. | 2,800. | 2,800. |
| Total length [mm]: | 123. | 145. | 165. | 220. |
| Bearing housing diameter: | 34. | 48. | 57. | 63.5. |
| Tip diameter: | 15.7. | 24. | 24. | 28. |
| Concentricity (max.) [mm]: | 0.015. | 0.015. | 0.015. | 0.015. |
| Tip length: | 23.5. | 30. | 33. | 36. |
