Feature(may vary by option.)
●Angle magnet in arrow shape: holds components at 45 degrees, 90 degrees and 135 degrees tilt - heat-resistant welding angle with flame retardant surface
●Welding aid replaces the 3rd Hand: mounting bracket for welding, soldering, scribing, fitting, adjusting, pipe installation, assembly work and much more. Suitable
●Strong and compact: magnetic welding angle with load capacity up to 34 kg - for flat, round and square workpieces
●Easy and precise installation and positioning thanks to three fixed angle dimensions and an additional drill hole (4.6 cm) in the magnetic angle
●Box contents: magnetic welding angle / welding magnet set of 2 (dimensions 190 x 123 x 24.5 mm, single weight 1.17 kg, colour red)
[2x 34 Kg Haftkraft]
[2x 11 | 3 Kg Haftkraft]
[2x 22 | 6 Kg Haftkraft]
[4x 11 | 3 Kg Haftkraft]
Description
Poppstar Welding Magnets
The helping hand when welding, soldering and assembling.
Poppstar Magnetic Welding Angle
|
|
|
|
|---|---|---|
Perfect hold at 3 angles.With the Poppstar magnetic welding angle, you can weld, solder and assemble workpieces easily without relying on assistance from others: The welding angles are easy to install and position and hold metal parts at angles of 45°, 90° and 135°. Thanks to a maximum operating temperature of 140 °C, the magnetic welding angles are also very temperature-resistant and therefore the ideal helper for assembly work, welding work and metalworking in general. |
Advantages:Arrow shape with outer plates that protrude over the magnet: Due to the resulting groove, the welding angle is also suitable for round components such as pipes. Leaves your hand free: Focus on the important work - you dont have to worry about an extra helper. |
High tensile force and practical drill hole.Poppstar Arrow Magnetic Welding Angles are available in different sizes in a set of 2. Vary the welding angle size depending on the component: the larger the arrow, the higher the tensile force. The angle magnets also have a drill hole that makes handling easier and additionally supports alignment and fixing. |
Areas of use:
Poppstar magnetic welding angles are used in workshops and industry. They are perfect for both DIY enthusiasts and craftsmen. Work with flat, round or square workpieces - the magnetic holders in arrow shape are stable, handy and flexible.
Due to their robustness, the welding angles are suitable for welding, marking, soldering, marking, marking, layering, lifting, mounting or pipe installation. They are an ideal aid for the clean and accurate fixing of sheet metal, profiles, plates, flat and angle irons as well as round material.
Available in different sizes (see table).
The Poppstar magnetic welding holder is available in three different sizes: Angle Magnet Set 2 x Small / 2 x Medium / 2 x Large
Technical details:
- Load capacity / magnetic force: 11.3 kg (25 lbs) / 22.6 kg (50 lbs) / 34 kg (75 lbs).
- Maximum working temperature: 140 °C.
- Material: Steel plates (carbon steel Q235) with permanent magnet / permanent magnet.
- Magnet type: Y30BH Ferrite Magnet
- Angle dimensions: 45°, 90°, 135°.
- Single weight of welding angle: 300 g / 540 g / 990 g.
- Dimensions (L x W x H): 120 x 83 x 14.3 mm / 155 x 103 x 16.3 mm / 190 x 123 x 24.5 mm.
- Colour: red.
|
|
|
|
|---|---|---|---|
| Poppstar Welding Magnet Small Set of 2 | Poppstar Medium Welding Magnet Set of 2 | Poppstar Welding Magnet Large Set of 2 | |
| Customer Reviews | 1,854
| 1,854
| 1,854
|
| Price | €12.10 | €20.30 | €25.72 |
| Dimensions: | 120 x 83 x 14.3 mm. | 155 x 103 x 16.3 mm. | 190 x 123 x 24.5 mm. |
| Magnetic load capacity | 11.3 kg. | 22.6 kg. | 34 kg. |
| Single weight. | 300 g. | 540 g. | 990 g. |
| Diameter bore hole. | 22.5 mm. | 28.8 mm. | 46 mm. |