Feature(may vary by option.)

●Box contents: wireless camera flash trigger and camera remote control function (1 transmitter, 1 receiver) + locking cable for Canon + studio light cable + 3.5 mm - 6.3 mm adapter + 23A battery + AAA alkaline battery
●Compatible with Canon EOS 750D 1200D 1300D 200D 100D 800D 760D 70D 77D 80D 700D 1100D 1000D M6 M5 650D 600D 550D 500D 450D 400D 350D 300 D 60D 60D 0Da Power Shot G10 G1 X G11 G12 G3 X G5 X SX50 SX60, Pentax K-1 K500 K50 K30 K20D K10D K3 K5 K7 K200D K110D K100D
●Receiver suits for flash such as Canon 600EX 600EXII 580EX II 580EX 540EZ 520EZ 430EX II 430EX 430EZ 420EX 420EZ 380EX Nikon SB-910 SB-900 SB-800 SB-600, SB-28, SB B-27, S B-26 and Olympus Pentax Sigma Metz speedlite.Please check the following description for more models
●JJC -Flash trigger is a wireless remote shutter release as well as a multifunctional flash trigger that can synchronously trigger flashes Speedlite and studio flashes. Supports simultaneous flash of multiple flashes.
●Flash with sync speed up to 1/250s, 16 adjustable radio channels, range up to 30 m

[1Sender+1Empfänger Replacement for Fujifilm RR-100]




[1Sender+1Empfänger Replacement for Canon RS-60E3]




[1Sender+2Empfänger Replacement for Canon RS-60E3]




[1Sender+1Empfänger Replacement for Canon RS-80N3  & TC-80N3]




[1Sender+1Empfänger Replacement for Nikon MC-DC2]




[1Sender+1Empfänger Replacement for Sony Multi Connector  & Sony RM-SPR1]




[1Sender+2Empfänger Replacement for Fujifilm RR-90]




[1Sender+2Empfänger Replacement for Canon RS-80N3  & TC-80N3]




[1Sender+2Empfänger Replacement for Sony Multi Connector  & Sony RM-SPR1]




[1Sender+2Empfänger Replacement for Fujifilm RR-100]




[1Sender+2Empfänger Replacement for Nikon MC-30  & MC-36  & MC-30A]




[1Sender+1Empfänger Replacement for Fujifilm RR-90]





Description

The JF-U 3-in-1 Wireless Flash Trigger & Remote Control is a versatile, reliable remote control kit that triggers external flashes and studio lights from up to 30 meters / 100 feet away.

By taking the flash away from the camera and positioning where you want it, you have more control over the direction of the light for better portraits, still life, group shots, event photography, and more.

The kit also offers the convenience of a wireless camera shutter, ideal for shooting wildlife, as well as for macro and close-up shots where the smallest camera movement can ruin an image.

Simplicity, comfort and reliability make it a great companion as a photographer.

Function:

Wireless flash trigger

Step 1: Make sure the transmitter and receiver are set to the same channel. Step 2: Turn the mode switch on the receiver to the "Flash" option. Then press the trigger on your camera, and both indicators on the transmitter and receiver turn green. At this time, your flash will be triggered successfully.

Wireless remote control

Step 1: Make sure the transmitter and receiver are set to the same channel. Step 2: Set the mode switch to the "Camera" option. Step 4: Press the trigger button on the transmitter half to focus, and the indicators on the transmitter and receiver should light green. Then press the shutter button completely, the indicators turn red and the camera shutter will be triggered.

Wired trigger

Step 1: Turn off the camera. Then connect one end of the trigger cable to the ACC1 socket of the transmitter and the other end to the remote control socket of the camera.Step 2: Turn on the camera. Half press the shutter button on the transmitter to focus, and down all the way to trigger the camera closure.

Supports triggering multiple flashes at the same time. (Please make sure the channel of all receivers is the same channel with the transmitter)

User instructions:

There are a total of 16 channels available to avoid interference from other radios. Therefore, if JF-U does not work normally, please adjust the channel and try again.The flash synchronization time of JF-U is up to 1/250. Please make sure the shutter speed of your camera is less than or equal to 1/250, e.g. B. 1/200, 1/160 If your shutter speed is longer than 1/250, e.g. B. 1/320, the pictures taken may be underexposed. In this case, please adjust the shutter speed of your camera. Since the JF-U does not transmit TTL setting, the use of a fully manually controlled flash or light unit is recommended. Please adjust the desired output power on the flash manually. If you use JF-U to trigger a flash, both the transmitter and the receiver work normally, but the flash is not triggered. Make sure the flash mode is set to manual mode. If you switch the mode of the receiver between "camera" and "flash", do not press the mode switch too quickly. Please wait one second in the "OFF" position before setting the switch to the other mode, otherwise there may be a failure.

What do you get?

JF-U transmitter x 1JF-U receiver x 1Studio light cable x 1Trigger cable x 13.5mm 6.3mm adapter x 1AAA alkaline batteries x 223A battery x1

Compatible with flashes with standard hot shoe:

For Canon 600EX/ 600EXII/ 580EX II/ 580EX/ 540EZ/ 520EZ/ 430EX II/ 430EX/ 430EZ/ 420EX/ 420EZ/ 380EX/ for Nikon SB-910/ SB-900/ SB-800/ SB-600/ SB-28/ SB-27/ SB-26/ SB-25/ SB-24for Pentax AF-540 FGZ/ AF-360 FGZ/ AF-400 FT/ AF-240 FT/ AF-200FGfor Sigma EF-530 DG Super/ EF-500 DG Super/ EF-430. for Vivitar 2for Viv85HV/ 283/ DF-400MZ/ DF-340MZfor Olympus FL-50R/ FL-50/ FL-36R/ FL-36for Metz 36AF/ 48AF/ 58AFAOther flash models with a trigger voltage of 12V or less

Note: Flashes with multi-interface shoe holders are not compatible. (As shown in FIG)

Compatible with the following cameras with standard hot shoe mount:

For Canon cameras:

EOS R7, EOS R, EOS R6, EOS RP, EOS Ra, EOS 200D II, EOS 250D, EOS 90D, EOS 60D, EOS 60Da, EOS 70D, EOS 77D, EOS 80D, EOS 100D, EOS 200D, EOS 300D, EOS 300V, EOS 3000V, EOS 30 0X, 0X, EOS 350D, EOS 400D, EOS 450D, EOS 500, EOS 600D, EOS 650D, EOS 700D, EOS 750D, EOS 760D, EOS 800D, EOS 1000D, EOS 1100D, EOS 1200D, EOS 1300D, EOS 1500D, EOS 3 000M5M5. , M6, M6 Mark IIRebel SL3, SL2, SL1, Ti, T1i, T2, T2i, T3, T3i, T4i, T5, T5i, T6, T6i, T6s, X, XS, XSi, XT, XTi, 2000EOS Kiss, EOS Kiss X2, X. 5, X6, X6i, X7i, X8i, X9, X10, X70PowerShot G1 X, G1X MarK II, G1X MarK III, G3 X, G5 X, G10, G11, G12, G16, etc.

For Pentax cameras:

K-1 Mark II, K-1, K3, K-3 II, K-50, K5, K5II, K-5IIs, K7, K10D, K20D, K30, K100D, K100D, Super K110D, K200D, K500, is D, is D, is D, is is DS, is DS, is DS2, is DL, is DL2, MZ-6, MZ-L, ZX-L, 645D, 645Z

For Contax cameras:

N Digital, NX, N1, N, 645

Specification

Model JF-U1 + cable-C (replaces Canon RS-60E3)
Wireless frequency system 433 MHz
Operating distance Up to 30 metres
Receiver includes 1/4 inch - 20 internal thread holes
Sync 1/250s
Frequency channels 16 channels
Wireless timer remote control macro arm light Battery compartment memory card case Hand strap for DSLR camera Compact camera tripod
Material: ABS ABS Polyester ABS Microfibre and ABS Aluminium alloy
Purpose: Self-timer, long-exposure timer, interval timer, control the number of shots and multiple exposure timers. For close-up shots or macro photography Storage AAA/LP-E6/LP-E8/LP-E10/LP-E12 batteries For memory SD/TF card For DSLR camera For DSLR camera

Looking for specific info?