The EVEROXX Paro S inlet belt winder is designed for belt widths of 23 mm and comes with a cover plate. It is placed in a wall box installed in the wall and screwed together with the cover plate. The belt winder has been tested for over 20,000 cycles and is very durable. A strap is not included and must be ordered separately.
The inlet belt winder is placed in a wall box installed in the wall and screwed together with the cover plate. Screws are not included, we recommend screws M4 x 40, (e.g.: item no. : 260037 - also available from us). The hole spacing is 134 mm. The spring box centre should be located in the middle of the wall box and can be adjusted between 70 and 85 mm. The belt winder can hold up to 3.50 m belt (strap width: 23 mm), depending on the wall box type also up to 5.30 m. For the roller shutter operation of up to 2.25 m high windows/doors, this belt length is absolutely sufficient.
Technical data:
- Quality from EVEROXX
- Item number: 110000.
- Weight: 260g
- Dimensions (H x W x D): 173 x 120 x 54 mm.
- Cover plate colour: white.
- Cover plate material: plastic.
- Strap winder material: galvanised metal.
- Diameter of spring box: 75 mm.
- Adjustment range of spring box: 70-85 mm.
- Hole spacing: 134 mm.
- Strap mount: 3.50 m.
- For belt width: 23 mm.
Product benefits:
- Specialist trade quality.
- Very long service life (20,000 cycles).
- Pre-tensioned for easy belt retraction.
- Cover plate included.