The mini surface-mounted belt winder from EVEROXX impresses with its long service life: the built-in spring is designed and tested for 20,000 movement cycles. After screwing on the belt winder, it can be rotated 180°. Thanks to the belt retraction aid, the strap is very easy to thread, the spring is already pre-tensioned.
The mini surface mounted belt winder screws to the wall or window frame. Screws are not included, we recommend screws M4 x 40, (e.g.: item no. : 260037 - also available from us). The hole spacing is 140 mm. A 5.00 m long strap with strap width up to 15 mm can be wound.
For this purpose, cut a hole at the beginning of the belt in the middle of the 15 mm wide strap. Slide this hole onto the end of the belt retractor and pull out the retractor and strap a little. Carefully let the hook supported on the clamp run into the belt winder housing. Also let the strap shrink slowly.
Technical data:
- Quality from EVEROXX
- Item number: 084000.
- Weight: 200g
- Dimensions (H x W x D): 157 x 135 x 22 mm.
- Strap winder colour: white.
- Strap winder material: plastic.
- Hole spacing: 140 mm.
- For belt length/width: 5.00 m / 15 mm.
Product benefits:
- Specialist trade quality.
- Very long service life (20,000 cycles).
- Easy belt retraction thanks to belt retraction aid.
- Can be swivelled 180°.
- Easy strap change.
- Belt attachment 5.00 m.