[black]
Vincent PHO-300 Phono Preamplifier MM/MC Black
Are you looking for an affordable and sonically excellent device to operate your turntable on an amplifier with ordinary line input? Then the new PHO-300 from Vincent is just the right solution. As with the big brothers PHO-701 and PHO-500, an elaborately designed, external power supply is also used. Negative influences on the part of the power supply, which can have a great influence on a phono preamplifier, are therefore a thing of the past. The power supply also keeps the power supply of the actual phono part always constant - fluctuations from the public power grid cannot influence. The phono part has of course been equipped with selected components to ensure low-noise playback. It can be switched between Moving Magnet (MM) and Moving Coil (MC) and therefore suitable for a wide range of pickups. Power supply and phono part are installed in high-quality aluminium housings and seamlessly integrate with the design of the PowerLine.
Technical data:
Transmission: 10 Hz - 20 kHz (+/- 0.5 dB); 10 kHz - 50 kHz (+/-2 dB).
Distortion factor: <0.05%.
Input sensitivity: MM: 58 mV, MC: 6.8 mV.
Signal-to-noise ratio: MM: > 83 dB, MC: > 70 dB.
Input impedance: MM: 47 kOhm, MC: 100 ohms.
Output impedance: 250 ohms.
Gain factor: MM: 40 dB, MC: 60 dB.
Inputs: 1 x stereo RCA, 1 x 5-pin DIN (DC IN PHO-300).
» Outputs: 1 x stereo RCA, 1 x 5-pin DIN (DC out PHO-300ps).
Max. Power consumption: 10 watts.
Weight: 0.9 kg (PHO-300ps), 0.6 kg (PHO-300).
Colour: black or silver.
Dimensions (W x H x D): 112 x 60 x 126 mm (2x)