WilTec 3/1 Lifting System with Side Connection, 450 W Discharge Head 7 m, for Dirty Water and Faeces

The WilTec 3/1 lifting system with integrated chopper is small, compact and hot water resistant up to a temperature of 80 °C. The device is equipped with 3 inlets for connection to sewage pipes, as well as an outlet and is able to reliably transport waste water up to 7 metres high and up to 40 metres wide. The toilet lifting system is therefore the inexpensive solution to your wastewater problem, as it allows waste water to be transported from even the most remote areas in the house, even if it is below the backflow level.

The pump can therefore be connected to the drain of the toilet system and also offers 2 connections for showers, baths, sinks, dishwashers, washing machines or similar installations. Unused inlets can be easily sealed with the included fasteners.

The lifting system is powered by a powerful 450 watt motor, which allows the lifting system to pump up to 100 litres of waste water per minute and guarantees the crushing of the solid components in the waste water before they are then transported through a 32/40 mm pipe. The pump switches on automatically as soon as the waste water in the collection box has reached a certain level and switches off immediately after emptying. The WilTec lifting system does not require any special care or maintenance, but should be descaled at regular intervals. The frequency of the need for action depends on the limescale content of your tap water.

Please note that apart from toilet paper, do not dispose of items in the toilet. In addition, only pressurised waste water may be introduced into the lifting system and washing machines and dishwashers should be introduced using a siphon or sink.