Features: Made of high-quality iron material, surface paint spray treatment, rust-proof and durable. Pointer pressure gauge with clear scales for easy reading. The long operating handle provides great leverage to save power and reduce hand fatigue. Suitable for pressure testing a variety of pressure containers, pipes, valves and rubber fittings. Widely used in chemical industry, construction, sanitary sector, oil, charcoal. - - metallurgie , shipbuilding and other industries.
Specification:
Item Type: Manual Pressure Test Pump
Maximum test pressure: 1000PSI/7MPa
Instructions:
1. Install the machine and attach the pump body to the water tank with four screws.
2. Install the water pipe and connect it to the pump body (Note: gasket connection, add washer, you can also use PTFE tape, otherwise it will leak easily)
3. Connect the other end of the outlet hose to the tested pipe.
4. Fill the test tube with water, let the air out and close the relief valve.
5. Fill the water tank with water and swing the handle up and down to start the pressure test.
6. When the pressure gauge rises to the required pressure, the pressure can be stopped (the normal tap water pressure is 0.3 MPa, the water pressure in the high-rise is 0.4 MPa, the water pipe pressure test is generally 0.8-1 MPa, 0.1, under pressure MPa corresponds to 1 kg of pressure).
7. If the displayed pressure does not fall off after stopping the back pressure, it can be proven that the pressure is