Feature
●✔ Parameters: stroke is approx. 3 cm - 15 cm. (15 cm in the default setting, the line can be easily adjusted); no load speed range is about 25-120 rpm; thrust range is approx. 1.5 kg - 18 kg.
●✔ 775 DC MOTOR The piston shaped linear actuator uses copper wire coil and built-in cooling fan, durable for use, with higher efficiency, lower power consumption and greater safety.
●✔ Easy to Install The piston shaped linear actuator with 3 screw holes, convenient for installation, it only takes a few minutes to finish the whole project.
●✔ Two optional control modes: only with speed controller with remote control and speed control.
●✔ We promise: 100% money back guarantee. If you have any problem with your item, please feel free to contact us, we will reply within 24h, and you will receive a full refund or replacement.
Description
|
|
|
|
|---|---|---|
|
Built-in fan. Export heat effectively and quickly to achieve cooling effect. |
If the gear runs abnormally and makes a strong noise, open the gear and apply some lubricating oil or grease inside the gearbox, the friction will be reduced and the machine will work more smoothly. |
This flat place must align the screws. Otherwise, the hub may fall off at work. |
|
|
|
|
|---|---|---|
|
Voltage range: DC12V-24V. Working current: Rated value 5A (not suitable for engines with starting current greater than 5A). Frequency: 13Khz. Remote control distance: Pull out the remote control antenna, which can reach 100 m in an open environment. There is no battery in the remote control. Please buy before use. Battery model: 23 A 12 V |
Input: AC100-240V 50/60HzOutput: DC 1-24V adjustableOutput current: 2 Total length of cable: 200 cm. DC plug: 5.5.2.5 mm compatible with 5.5.2.1 mm |
M8 screw stainless steel. End connection diameter 1.4 cm, length 10.6 cm, weight: 0.06 kg. Application: Hubinear drive or for DIY design |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 24V80mm120rpm | 24V150mm120rpm | 24V150mm120rpm | 3XLR adapter | Suction cup adapter | Vac-U-Lock Adapter | |
| thrust | 3-18 kg | 1.5-18 kg | 1.5-18 kg | |||
| Stroke length | 20 mm - 80 mm | 30 mm - 150 mm | 30 mm - 150 mm | |||
| Speed | 25-120 rpm | 25-120 rpm | 25-120 rpm | |||
| Accessories | Speed control, remote control, end connector | Speed control, end connector | Stand kit, speed control, remote control, end connector |