Feature

●Made of hardened carbon tool steel
●Precise centring possible thanks to the centring tip
●Retraction thread on centring tip, so little pressure required
●Very good chip removal
●Diameter [mm]: 10, 12, 14, 16, 18, 20, 22, 24 | Total length [mm]: 600 | Material: carbon - tool steel


Description

Auger drill set, 8 pieces, diameter 10 - 24 mm, length 600 mm, shape Lewis

The auger drill bits from this set are made of high quality hardened carbon tool steel. This material selection allows for high cutting performance and resilience. The auger drill is suitable for drilling through holes in beams and rafters as well as for making deep blind holes. By tapering towards the clamping shaft from 1:50 to 1:100, clamping in the hole should be avoided.

Auger drill set, 8 pieces, diameter 10 - 24 mm, length 600 mm, shape LewisAuger drill set, 8 pieces, diameter 10 - 24 mm, length 600 mm, shape Lewis

Box contents:

The set is delivered in a practical wooden box.

1 x auger drill diameter 10 mm, length 600 mm, clamping shaft 8.5 mm, hexagonal, shape Lewis, 1 x auger drill diameter 12 mm, length 600 mm, clamping shaft 10.5 mm, hexagon, shape Lewis, 1 x auger drill diameter. 14mm Length 600 mm, clamping shaft 10.5 mm, hexagonal, shape Lewis1 x auger drill diameter 16 mm, length 600 mm, clamping shaft 10.5 mm, hexagonal, shape Lewis1 x auger drill diameter 18 mm, length 600 mm. clamping shaft 10.5 mm, hexagonal, shape Lewis1 x auger drill diameter 20 mm, length 600 mm, clamping shaft 10.5 mm, hexagonal, shape Lewis1 x auger drill diameter 22 mm, length 600 mm, clamping shaft 10.5 mm, S. hex, shape Lewis 1 x Auger Drill Bit Diameter 24 mm, Length 600 mm, Clamping Shank 10.5 mm, Hexagonal, Shape Lewis

Advantages of paulimot auger bit set

Centring tipCentring tip

Retraction threadRetraction thread

TaperTaper

Accurate centering

The auger drill bit is equipped with a centring tip, which allows for very accurate centring of the drill.

Low pressure required

Thanks to a feed thread located at the centre tip, the drill bit pulls into the wood, so that less pressure has to be applied when drilling.

Clean hole edge

While thanks to the also existing pre-cutter, a clean and tear-free hole edge can be produced even at low speed, the auger drill also impresses with a very good chip removal.

Auger drill set, 8 pieces, diameter 6 - 20 mm, length 200 mm, shape Lewis Auger drill bit set, length 460 mm Auger drill set, 8 pieces, diameter 10 - 24 mm, length 460 mm Auger drill set, 8 pieces, diameter 10 - 24 mm, length 600 mm, shape Lewis
paulimot Auger Drill Bit Set, Length 200 mm Paulimot Auger Drill Bit Set, Length 230 mm Paulimot Auger Drill Bit Set, Length 460 mm paulimot Auger Drill Bit Set, Length 600 mm
Made of hardened carbon tool steel ✓ ✓ ✓ ✓
Total length [mm] 200 230 460 600
Diameter: 6, 8, 10, 12, 14, 16, 18, 20 6, 8, 10, 12, 14, 16, 18, 20 10, 12, 14, 16, 18, 20, 22, 24 10; 12; 14; 16; 18; 20; 22; 24
Auger drill with centre tip ✓ ✓ ✓ ✓
Areas of application: Through holes in beams and rafters, making deep blind holes Through holes in beams and rafters, making deep blind holes Through holes in beams and rafters, making deep blind holes Through holes in beams and rafters, making deep blind holes
Box contents: 8 pieces 8 pieces 8 pieces 8 pieces
paulimot bannerpaulimot banner