[Durchmesser Ø d1=105mm]
[40mm Diámetro de Corte | 110mm Longitud de Corte | 19mm Diámetro del Vástago]
Carbide Tipped Core Drill Bit [Hard-Line] Weldon Shank, Usable Length 110 mm
Features:
Shaft diameter d2: 19 mm (3/4 inch).
Drill diameter d1: selectable from 14 - 120 mm.
Weldon shaft
Other sizes, quantities or shaft types on request.
Carbide Tipped Core Bits [Hard-Line] are manufactured with tapered spiral for clean chip flow and highest machining performance even on difficult materials.
Carbide tipped core drills [Hard-Line] are fitted exclusively with Sandvik carbide teeth.
We mean, only the best carbide is good enough for core drills.
Carbide Tipped Core Drill Bits [Hard-Line] are crafted in an intricate pre-center post cutter geometry.
This results: chatter-free, quiet and easy machining with the highest service life.
Use:
In addition to the highest service life in all steels, only carbide tipped core drills offer:
Drilling in steels up to 40 Rockwell [HRC], as well as 1400 N strength.
Drilling into all stainless steels.
Drilling into the most difficult alloys [Hardox/Inconel/Titanium]
Drilling excellently even in soft materials such as aluminium, copper, brass etc.