Feature(may vary by option.)
●[Voltage Protection]: It is mainly used to protect against overvoltage, undervoltage or over current in the distribution line of household boxes or to protect single-phase power supply equipment
●[Good performance]: The protector has surge protection, undervoltage protection and other functions. Low power consumption and long mechanical life
●[Main feature]: when the line has overvoltage or undervoltage, over-current state, the product can immediately shut off the power supply, protect the electrical equipment from damage; When the mains voltage returns to normal, the protection can automatically and normally
●[Setup]: Suitable for single-phase AC voltage 230V, 50/60Hz, rated operating current 63A and less users or loads
●[Please note]: after the overcurrent exceeds 5 times within the specified time, the protective lock does not automatically restore the power supply; you need to manually press SET to unlock the power supply, which can effectively protect the frequent opening and closing caused by not timely release of the overcurrent
[63A]
[40A]
Description
Specification:
Nominal voltage: 230 VAC 50/60 Hz.
Rated voltage 1-63A adjustable (standard 63A)/1-40A adjustable (standard 40A).
Surge protection value range 221V-300V-OFF adjustable (standard value 280 V)
Surge recurring voltage switching range 220 V-299 V (standard value 250 V)
Surge protection intervention time 0.1 s - 10 s (default value 0.1 seconds).
Low voltage protection value range 219 V-150 V -OFF adjustable (standard 160 V).
Low voltage recurring voltage switching range 151 V-220 V (standard value 180 V)
Low voltage protection action time 0.1 s - 10 s (standard 0.1 seconds).
Over current control range 1-63A (standard 63A)/1-40A (standard 40A)
Overcurrent action range 0.1s - 512s (standard 5.0 seconds)
Delay time for error recovery 2s - 512s (default 60 seconds)
Power switch-on delay 2 s - 255 s (2 seconds by default).
Power consumption ≤ 2 W.
Electrical mechanical life ≥4000 times.
Installation method DIN rail.
Working environment temperature: -25°C ~ +40°C. Humidity: height: no more than 2000 m.
Size: approx. 81 x 36 x 60 mm / 3.2 x 1.4 x 2.4 inches.
Optional Style:40A 63A
Package includes:
1 x protector.
Note:
1. The neutral conductor N must not be connected incorrectly and must be safe. The zero line N of the protector is directly connected, and there is no disconnect function.
2. This protector has no insulation and short circuit protection. Please use a small circuit breaker at the front end to protect against insulation and short circuit. Please disconnect the front end disconnect switch when repairing the circuit.
3. As the protector has a self-reset function, after overcurrent protection and disconnection of the protector, immediately remove the electrical load device and check the circuit, otherwise the protector