Box contents:
1 x test clip and 2 x adapter board.
Note: With a programmer with protected function, the clip cannot be read under normal voltage. At this time, a 3.3 V voltage must be added. The method is: clip the chip, the 8th Pin of the chip is applied a 3.3V voltage to the corresponding clip pin. In general, the 3.3V power supply has two wires, so the VCC corresponds to the clip, and the other wire is directly earthed.
The programmable test clip is suitable for online programming of 8-pin broadbody and narrow body chips from the EEPROM 93CXX / 25CXX / 24Cxx series.
Mode - Front: the pin detent is 1.27mm, which is suitable for converting common SO8, SOP8, SOIC8 and other packages into DIP8 inline. The Back The pin grid is 0.65mm, which is suitable for converting commonly used SSOP8, TSSOP8, MSOP8 and other packages into DIP8 inline.
SOP8 PCB Adapter - Change the package mode of the chip. (SMD mode to inline mode)
Applicable Instruments - Used for various color TV storage (24 Series IC), Liquid Crystal (24.25 Series IC), Desktop Motherboard (25 Series IC), Notebook (25 Series IC), Router (25 Series IC), Card (25 Series IC), DVD (25 Series IC), Set Top Box (25 Series IC), Set Top Box (25 Series IC). ), software entrance. sealing, backup, erasing, burning. ing
Tip - The programming test clip is only a plug that has no function of programming and reading. It must be used with the corresponding programming module.