This level converter is mainly used for adapting the SPS or MCU interface to other circuits, signal level conversion circuits for external circuits or other level conversions between control circuits of 10 MHz bandwidth, which can effectively guarantee the speed and integrity of the signal.
Features:
The module can convert a 5V input signal to a 24V level signal or a 24V input signal to a 5V level signal.
It can also convert signals from 5V to 5V or 24V to 24V and isolate input signals and output signals via optocoupler, which can improve the suppression ability of the circuit.
The input level can be adjusted via DIP switch, the 24V level output is NPN-OC output, the output current is 1.5A.
It has conversion and gain circuit, good wave and strong driving ability.
Compatible with a common cathode or common anode input port that meets European and Japanese SPS interface standards.
Compatible with the AC/DC input power supply interface equipped with a power indicator light.
If the output is selected as 24V level, it is a NPN-OC output with a maximum load capacity of 1A. The 24V output is an OC output (NPN collector idle output). If you want to test the output, a resistance must be added. Usually use a 10KR resistor.
When converting the signal to 24 V level, the power supply of the input should be 24 V.
You can use 4 pieces of M3 spacers (not included) to install it.
Specification:
Model: 8-5V24V-D.
Channel: 8 channel.
Input: NPN or PNP, 5V or 24V rectangular signal.
Output: NPN 5V or 24V.