Comfort MAT BLOCKSHOT 7.0 mm This is a high quality product. It is used in places that worry about the strongest noise. Such as floor, trunk, wheel arches, trunk sides and plastic wheel boxes from outside and inside. The product consists of: 1. AdiT waterproof adhesive that is resistant to high and low temperatures (-50°C to 150°C), ensuring the effect of tightness even under difficult external weather conditions. 2. Foam rubber 3. A special butyl mixture 4. Soundproof membrane Advantages of the product: - High sound insulation up to -30 dB in a wide frequency range (standard products have up to -20 dB). - Does not rot as it does not absorb moisture - 100% water repellent. - Waterproof adhesive that is resistant to harsh external weather conditions. - 7 mm thick - blade weight 1.7 kg (4.9 kg / m2) -Dimensions of the mat 50x70cm (0.35 m2) Application of the Comfort MAT mats: basically you need to know that there are two types of insulation mats (1: anti-drummer mat 2: soundproof) and each mat is seen as a single step of work. The anti-droning mat is used to stabilize the vibration of the vehicle body that is prone to movement (while driving). The stabilisation of the resonance body reduces a large part of the causes noise in the vehicle interior. To achieve the maximum damping effect, the second step would now follow. The complete surfaces that have been glued with the anti-drohn mat are now glued to the soundproofing mat. Thus, the thermal and acoustic effect of the insulation would be best. Easy to stick the mats on top of each other. 1. Step - Anti vibration (anti-drum) 2. Step - Sound insulation