Feature(may vary by option.)
●The VCC 1212-50 is a B2B charging booster without galvanic insulation for charging 12 V batteries from a 12 V alternator / battery --- max. Charging current: 50 A, input voltage range 12 V, charges 12 V batteries, recommended battery capacity: 75 – 440 Ah – Dimensions: 135 x 160 x 72 mm – Weight: 0.95 kg – Increases or decreases the voltage to the necessary level to be able to precisely charge the on-board battery with the optimal charging characteristic for you
●The device completely compensates for line losses and voltage fluctuations of the alternator, such as those in Euro 6 vehicles (intelligent alternators) to a considerable extent, is characterised by compact design, low weight (high-frequency switch mode technology) and strongly dimensioned power components for safe operation --- Significantly better energy balance of the on-board battery --- there is no interference with the starter circuit
●The charging voltage is free of peaks and regulated so that overcharging of the batteries is excluded – Fully automatic operation: the device is constantly connected to the batteries and is automatically activated by the running alternator of the vehicle. When the motor is stationary, the batteries are not discharged --- Connection for battery temperature sensor (sensor included)
●With simultaneous consumption, the battery is further charged or fully maintained. The adjustment of the charging times calculates and monitors the device automatically --- Monitoring free charging: multiple protection against overload, overheating, overvoltage, short circuit, misbehavior and battery back discharge through electronic control up to complete separation of device and battery --- Easy parallel operation with additional charging sources on a battery
●For lead batteries, the charging voltage is automatically adjusted to the battery temperature. This causes a better full charge of the weaker battery in the cold, avoiding unnecessary battery gassing --- LiFePO4 batteries: battery protection at high and adjusted charge at low temperatures below 0 °C. Charging aid for deeply discharged lead batteries: gentle pre-charging of the battery up to 8 V, then powerful support of the battery with any consumers still switched on
[1212-20C 20A]
[1212-50 50A]
[1212-70 70A]
[1212-90 90A]
Description
Universal multi tripod
For on-board batteries in classic lead-acid, lead-gel or lead-AGM as well as modern lithium LiFePO4 technology, the selectable charging programmes ensure a monitor-free, quick and gentle full charge from every charge state, with subsequent full upkeep and maintenance of the battery. Connected 12 V consumers are automatically supplied, even if the on-board grid is heavily loaded. The automatic power control ensures the necessary safety and start-up ability of the vehicle.
What added value does the use of a B2B charging converter offer me?
The charging converters ensure the optimal and fast charging of the supply battery from the alternator during the journey. Unlike the simple cut-off relay, the charging voltage is raised to the value required for the respective battery type for a full charge and required by the battery manufacturers. So the full charging current can flow and in a short time already charge significant amounts of electricity into the battery. Long charging cables and losses are adjusted cleanly, as well as voltage fluctuations on the alternator. For charging converters with different input and output voltages (12V/24V or 24V/12V) the easy charging of a second battery is possible even without the installation of a second alternator. br>
The charging converters thus provide the familiar high-quality battery charging of Votronic chargers even while driving. The intelligent micro-processor charge control with IU1oU2oU3 charging and dynamic charge time calculation automatically ensures a fast and gentle full charge and subsequent full charge retention of the connected batteries from any charge level, and ensures the simultaneous supply of consumers parallel to the supply battery.