Feature(may vary by option.)
●Recovery board traction mat – the package contains two recovery tracks, each 106 x 31 x 6 cm, with a net weight of 5.5 kg each. Whether family car, off-road vehicle or truck, it can be used well.
●High-quality material: these traction boards use solid 100% reinforced strong nylon. It can withstand a maximum pressure of 10 tons and is not easily deformed. It has good heat resistance and wear resistance, high strength, good toughness and UV resistance.
●👍Design: The surface of the recovery board is made of a special tooth pattern, which adapts better to the tyres of the vehicle during use, providing more friction and stability to better grip the tyres of the vehicle. The two ends of the dodge plate are constructed with small inclinations, which is convenient for the user to insert them in the place where the tyre is clamped.
●👍This traction aid is also equipped with a set of accessories and storage bags. The storage bag can conveniently store the traction aid. The holder can install the sand plates on the car, which is more convenient to carry.
●Multifunctional: use the bottom as a shovel to remove dirt, or use the traction tape as a flat surface to jack up the vehicle with the integrated jack holder in the middle.
[106 × 31 × 6cm mit Installationstool]
[106 × 31 × 6cm]
Description
Getting stuck in snow, sand or mud on a pleasant ride can be frustrating.
With the extra-long traction aids, snow, mud or sand lose their terror. Simply place on the lanes and start driving without spinning tyres! You can also get your caravan back on the road so quickly.
In addition, with the practical carry bag, you can easily take the traction aids with you in the boot or storage space. So you always have them at hand when you need them..Thank you for supporting our products. I wish you a pleasant journey! !
Product parameters:
Size: 106 x 31 x 6 cm.
Material: strong nylon.
Weight: 5.5 kg.
Package includes:
2 x recovery boards.
1 x storage bag.
1 set of fixing nails.
Three steps to using a recovery board
Step 1: Drill a hole under the tyre with a shovel. Dig a track in front of all tires to create a way to roll down. The goal is to reduce air resistance so you can maintain the swing.
Step 2: Reduce the tyre pressure to a comfortable level for you. We recommend taking an air compressor with you, which is essential off-road or off-road.
Step 3: Place the chain on the tire, hold the gas until you feel the car is lifting, and then increase the gas until the traction is reached.