Feature(may vary by option.)
●Ergonomically shaped wall mount for awning supports: the compact support foot mount is fixed to the vehicle wall with two vacuum cleaners - no screw required!●Skilled helper - attach your awning supports directly to your vehicle - simple, safe, flexible and quick, with just a few simple steps.●Suitable for many awning types – please select the appropriate support foot mount based on the selection – the marquise type stands on the front cover.●The support foot is enclosed by the mounting of the wall bracket and can not cause any damage to your vehicle. Helpful for a motor home, caravan, camping, made in Baden Württemberg/Germany by Manufaktur3D.●- -[Stützfußhalter Dometic]
![](https://m.media-amazon.com/images/I/41Mnnm7HRGL._AC_.jpg)
[Stützfußhalter Fiamma]
![](https://m.media-amazon.com/images/I/41EhYcq1JAL._AC_.jpg)
[Stützfußhalter Thule Omnistore]
Description
Product description
MANUFAKTUR3D support foot holder for awnings are simply attached to the vehicle wall. With the double vacuum system, your awning supports can be securely attached to the wall of your caravan or motor home. Perfect for all surfaces on which you cannot mount using a ground nail or guy rope, therefore particularly suitable for pitches on gravels, plaster, asphalt or sand. Weather-resistant, UV-resistant, top quality, made in Germany. Contains: 1 x pair of vacuum support foot holders consisting of two support foot holders equipped with double vacuum system (see picture with shopping star). The awnings, awning poles, tensioning straps and mounting materials shown in the pictures are not included. They are used only to display the functionalities.
Safety Warning
Vacuum suction cups adhere permanently only to clean, smooth and non-porous surfaces. Do not attach the suction cups to stickers on the vehicle - the correct hold must be checked after installation. Never step under floating load!
Legal Disclaimer
The vacuum support foot holder can only be used for the specified awning types and must be attached without modification. The sufficient load capacity of the substrate must be checked by the operator before attaching the support foot bracket. The adhesion of the suction cups may vary depending on the surface finish and must therefore be checked by the operator after installation. No property or personal damage due to misuse and their consequences are assumed. The use of the support foot holder as a pull hook and guy eyelet is not permitted. The responsibility for the use lies exclusively with the operator and should be monitored during operation. In general, all operating instructions, safety instructions, warnings and restrictions of the awning manufacturer apply. They must be observed and adhered to. Warning: vacuum suction cups adhere permanently only to clean, smooth and non-porous surfaces. Do not attach the suction cups to stickers on the vehicle - the correct hold must be checked after installation. Never step under floating load!