Feature

●MULTI-PURPOSE: for use on tubeless rim setups. Different band widths are available, please choose the band width according to your rim inner width.
●HIGH PROTECTION Very high toughness and sufficient elasticity can effectively prevent the tire from being punctured by glass, thorns, nails, sharp objects, etc.
●KEEP AIRTIGHTNESS Made of solid PET materials with the characteristics of high tensile strength, harmless and lightweight. The tape is used to seal the inner hole of the rim and keep the air tightness of the tyre under high pressure, yet very elastic and airtight.
●Easy Application It is not easy to move and loose, people can install easily and quickly, just stretch over your rims and keep them in place. Easy to carry. It does not increase the load and leaves no glue.
●Rim strip: To avoid damage to the rim, the inside of the rim is lined with a rim strip. This is a custom-fit rubber strip, or pre-rubberised cotton tape applied to the rim surface. To do its job, the rim strip must go around the rim and cover any spoke heads or holes (except the valve hole).


Description

FRIFLY Tubeless Bicycle Rim Tapes Width 20/23/25/27/29/31/33/35/37 mm x Length 10 m, Bicycle Wheel Rim Strip, Tubeless Vacuum Tyre Pad Tape for Road Bike MTB

Specifications:
Material: PET special adhesive
Length: 10m
Weight: 33.4g
Width: 20/23/25/27/29/31/33/35/37 mm.
Name:Vacuum Tire Pad
Package Includes: 1 x Tubeless Bike Rim Tape
Color: Blue

Package dimensions: 13.5 x 2 x 16 cm.

Size selection reference:
Used to seal the inner hole of the rim and maintain the airtightness of the tyre under high pressure.
It is recommended to wrap each rim twice. All specifications are 10m long.
Mountain bike reference width: rim inner width + (2~4) mm (or the outer width of the rim is approx. - 2 mm). Most of the 23/25mm tyre pads are used.
Road Bike Reference Width:Narrow ring (23mm outer width) usually uses 18mm tire pad, grease ring (25mm outer width) usually 21mm tire pad.
16mm tyre pads are recommended for BMX road bikes.
10 m is enough for 2 pairs of mountain bikes).
10 m is enough for a racing car (the road car is wrapped around 2 levels).