Hole and seam proof, 12 g.
The hole and seam seal from fishingglue.de is the "solution" for quick sealing of seams and small holes up to max. 3 mm. For holes larger diameter 3mm, please use our PVC and PU repair kits.
Suitable for items made of soft PVC, faux leather and PU (polyurethane) as well as for fabrics and fabric surfaces made of vinyl, polyester and nylon.
Instructions for use with hole finder:
To use, air must still be contained in the damaged part (ISO mat, air mattress, etc.). In case of complete air loss, fill some air into the damaged part. Run the hole finder with the grid side down over the surface to be tested until the moving beads indicate the leak/hole. Mark this area e.g. with a pen. Now remove the air from the part to be repaired or let the air escape for so long that no air leaks out of the damaged area. Now you can repair or seal the damaged area with the hole and seam seal according to the following instructions.
Instructions for use hole and seam sealer:
Clean and dry the area to be repaired or the seam to be sealed from impurities (even grease and silicone free). Then apply the hole and seam tight generously to the damaged areas or seam and allow to dry for at least 30 minutes. Repeat the job if necessary. The drying time for highly stressed parts such as sleeping mats, air mattresses etc. is at least 3 hours. If you are not sure whether the defective item/material is repairable with the hole and seam sealer, you should Test the application in advance in an invisible area. Avoid direct sunlight and draughts with every repair/application. Temperatures below 5°C can negatively affect the repair result.
Product safety:
Danger
Highly flammable liquid and vapour. May cause drowsiness and dizziness. Causes serious eye irritation.