Specification:
Item type: Depth gauge
Material: 316L stainless steel + anti-fog glass
Installation diameter: Approx. Φ52 mm/2 inches
Depth display range: Approx. 100 m / 110 yd
Backlight Color: White
Operating voltage: 12 V DC
Working current: ≤ 60 mA
Working temperature: -30°C to +75°C
Storage temperature: -40°C to +85°C
Protection class: IP67, the back cover is IP5
Operation:
A. This device only works with a 12V system to indicate the set depth. Usually the buzzer beeps once, if it has been connected correctly, then turn on the power.
B. Keypad "Mode": Short press the "Mode" keypad to switch SH/DP/KL/ UN. Press and hold the "Mode" keypad to turn the monitor on/off. Short press the button to set the desired value. Press and hold the keypad to increase / decrease the digital value fluently.
Parameters: SH: (Low Level Alarm) Range: 0-0.6-19.9, when the level is no longer appointed as value (SH), the symbol flickers and the buzzer beeps all the time. If SH=0, no alarm, the setting range is 0.6-19.9
Range:
1. Unit "M": 0-99 cm
2. Unit "FT": 0-199
3. Unit "F": 0-49. When the level exceeds the specified value, the buzzer sounds twice to indicate the keel offset (KL):
Range:
1. Unit "M": 0-6.0
2. Unit "FT": 0-19.9
3. Unit "F": 0-3.3
Package list:
1 x depth gauge
1 x sensor (with cable)
2 x mounting screws
1 x bundle of power cable
1 x user manual (English language not guaranteed)