Specification:
Colour: black.
Material: ABS
Size: 3.9 x 2.1 x 1.7 cm (L x W x H).
Weight: 32gVoltage: 12-18V
Working current: 3A.
Time-lapse shutdown: 15 seconds.
Package list:
1 x daytime running light control.
Note:
After connecting the battery, the daytime running light lights up for about 15 seconds and then turns off the light. This is a normal phenomenon (realization of the delay function). Then you need to start the car. When the voltage reaches 13 V +, it starts to work.
The product contents:
1. The starting voltage is 13V+ and the flame failure voltage is lower than 12.5V (if it is higher than this value, it will be extended for a few minutes until the voltage drops.)
2. 1 pair of daytime running lights total power does not exceed 18W (most daytime running lights do not exceed the total power)
Wiring instructions:
1. First connect the positive and negative side of the daytime running light left and right and connect the negative poles first.
2. Connect the red and black wires of the input terminal to the fuse on the controller to the positive and negative pole of the battery and the red and black cables of the output terminal to the positive and negative pole of the daytime running light/p> 3. Connect the yellow line on the controller to the positive pole of the headlight (or reading light). When the headlight (or reading light) is turned on, the brightness of the daytime running light is halved (darkened) to achieve the dimming function (yellow line). Does not affect other uses).