Feature

●Connect one end of the water hose to the nozzle of the wet model trimmer and the other end to the tap, open the valve
●Connect the disposal hose to the device
●Connect the power cord and turn on the power switch (O=off, l=on)
●When braking, it is normal to hear a click before the sand tray stops. If the sand tray makes unusually loud noise, remove it and use the included Allen key to adjust the screw on the back cover (18).
●To check if you need to replace the grinding wheel, turn the disc by hand and estimate if the platform jumps more than 2mm, change the disc to the outside of the sand board)


Description

Features:

1. Connect one end of the water hose to the nozzle of the wet model trimmer and the other end to the tap, open the valve

2. Connect the disposal hose to the device.

3. Connect the power cord and turn on the power switch (O=off, l=on)

4. When braking, it is normal to hear a click before the sand tray stops. If the sand tray makes unusually loud noise, remove it and use the included Allen key to adjust the screw on the back cover (18).

5. To check if you need to replace the grinding wheel, turn the disc by hand and estimate if the platform jumps more than 2mm, change the disc to the outside of the sand board)

Please note:

For unusual noise when working on

Possible cause: ① Axon loses disc is not smooth enough.

How to solve it: ①Dissemble the disc with wrench, make the snap.

Wrestle tightly; ② Change the disc.

The device does not work when it is turned on.

Possible Cause: ① Fuse Blown; ② Motor Blown; ③ Switch Faulty.

How to solve the problem: ① Change the fuse (22) in the socket; ② Change the motor ③ Change the switch

Specifications

Voltage: 220V/50Hz ±10%.

Power: 500 W. Speed: 2800 rpm.

Dimensions: 44 x 35 x 35 cm. Weight of the tooth trimmer: 20 kg.

Contents:

1 x JT-19 wet model trimmer grinding wheel dental laboratory equipment.