Feature(may vary by option.)
●Accurate size: spiral cutter with 8 mm shank, 8 mm cutting diameter, 28 mm cutting length, 76.2 mm total length. The cutter is very precisely processed and there is no diameter difference between bearing and cutter diameter. This creates a very even edge when flush milling.
●【Ideal for flush milling】Two ball bearings are attached at the top of the milling head, which should allow easy, lateral guidance. The spiral cutter with its flush ball bearings is well suited for milling edges flush or copying, the dimensional accuracy is very accurate.
●Sharp cutter: Perfect spiral processing on the milling head, well made, very sharp cutting edge for burr-free cutting, good wear resistance, as this is a solid carbide cutter, it is very stable and can withstand high cutting data.
●PTFE coating: thanks to the PTFE coating of the CNC cutter, the accumulation of wood chips, resin and asphalt can be effectively prevented and the hardness is high, good cutter that leaves a clean cutting edge and eats effortlessly through hardwood.
●Includes the list: 1 x spiral flush cutter, 8 mm shaft, if you have any problems with our products, please send us to Sinoprotools. We will replace the new product free of charge for you.
[8x30mm Z2+2]
[Fasefräser 30° V-]
[V-Nutfräser 90°]
[8x32mm Z2+2]
[VHM 8x28mm Z2-Upcut]
[VHM 12x32mm Z2-Upcut]
[VHM 8x16mm Z2-Upcut]
[Nutfräser 90°V]
[VHM 8x28.6mm Z2+2]
[8x25mm Z2+2]
[Fasefräser 45° V-]
[8x25mm Z2-Upcut]
[6.35x25.4mm Z2+2]
[8x25.4mm Z2+2]
Description
Product description:
Sinoprotools spiral flush cutter, 8 mm shaft spiral cutter, solid carbide/solid carbide CNC router bit with double ball bearing, flush cutter for cutting (up-cut 28 mm cutting length).
Excellent cut finish
The sharp and smooth flute leaves an excellent cutting pattern
Widely used
Perfect for trimming, trimming, measles and grooves of softwoods, hardwoods, plywood, laminate, oak, MDF and any hardwood finishing
Smooth flow
High quality bearing, double independent ball guide bearings secured with a locking ring at the tip ensure quiet running
Safety instructions:
1. The cutter set is intended for industrial cutting/engraving only.
2. When not in use, please put it in the plastic box.
3. Use the area suitable for hardwoods, chipboard, MDF, plywood compact boards, acrylic; avoid cutting ferrous metals and non-wood materials, iron, etc.
4. Please wear good protective measures.