Feature

●For drilling / turning heads with 8 mm mounting hole
●For making precise holes
●For use on milling machines
●5 carbide-tipped boring rods, length 53 to 86 mm
●Length of drill rods [mm]: 53, 59, 65, 74, 86 | Bore diameter min. [mm]: 8 | Cutting material: carbide (tungsten carbide) | Diameter clamping shaft [mm]: 8


Description

This drill rod set consists of five carbide tipped drill rods for vertical use in a drill or removal head.

The chip and free surfaces of the carbide plates from this set are already pre-ground. In order to achieve an optimal result, the chip conductor steps must be cut. Once the cutting edges of a drill rod are worn, they can be resharpened. For example, a diamond grinding wheel.