Feature(may vary by option.)
●Package includes: you will receive 1 piece SRDPN1616H12 5/8 inch/16 mm shank diameter carbide router tool holder, 11 pieces RPMT1204 MOE indexable insert router bits and 1 piece T15 wrench.
●Material: the material of the SRDPN1616H12 5/8 inch lathe milling tool holder is 40Cr steel, it has the characteristics of durability, robustness and stability, as well as good rust protection performance. The cutting material of the RPMT1204 MOE indexable insert router bits is carbide and the coating is CVD Al2O3 TICN, it has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel.
●Size of the milling tool holder: shank diameter (length × width): 5/8 inches x 5/8 inches (16 mm x 16 mm); total length: 100 mm ≈ 3.93 inches.
●RPMT1204 MOE Carbide Router Bit Size:Insert Style:RPMT,Thickness:0.19"≈4.8mm,Diameter:0.47"≈12mm,P=11° Degree.
●Easy to store: the router tool holder and carbide router bits are packed in a plastic container, safe and easy to store, please rest assured to buy!
[SRDPN1616H12]
[SRDCN1212H06]
[SRDPN1616H10]
Description
1 piece SRDPN1616H12 rotary holder + 11 pieces RPMT1204MOE milling bits
Rotary Tool Holder Shank Diameter: 5/8 inches x 5/8 inches / 16 mm x 16 mm. Total length of the rotary tool holder: 100mm ≈ 3.93 inchScrew: M4*8Wrench: T15Insert: RPMT1204MOEInsert Diameter: 12 mm ≈ 0.47 inchInsert thickness: 4.8 mm ≈ 0.19 inches
---------Warning:
Broken cutting tools can break. Near use, wearing goggles is required. Hazardous dust is created when sanding. To avoid harm to health, ensure sufficient ventilation.
RPMT1204 MOE Carbide Indexable Inserts
Insert: RPMT1204MOEInsert Diameter: 12 mm ≈ 0.47 inchInsert thickness: 4.76mm ≈ 0.18-inchHole Diameter: 4.4 mm ≈ 0.17 inchP = 11° degrees
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 5/8 inch turning holder | SER1616H16+16ER | SDJCR1616H11 | 3PCS 1/2" turning holder | 3/8 inch turning holder | 16IR carbide insert | |
| Material: | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | Carbide |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| SDJCR1212H11 turning tool | SNR0013M16 | S16Q-MWLNR08 + S16Q-MWLNL08 | RPMT08T2MOE | MCSNL1616H12 | 4PCS 1/2" Turning holder | |
| Material: | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) | 40Cr steel (holder) + carbide (inserts) |
