Feature

●High-quality bearing design: a turning centre is a tool that has been ground to a point to position a workpiece exactly on an axis. The turning tools use high speed bearings for high accuracy and are designed for lathes in medium speed and medium load environments.
●Concentric work: The lathe centre has an enclosed angle of 60°. The main purpose of a centre is to ensure that concentric work is performed. This allows the workpiece to be transferred between machining operations without loss of accuracy.
●High practicality: One part can be turned on a lathe. Sent for hardening and tempering, and then ground between tips in a cylindrical grinder. Well balanced and smooth for effective turning. Ideal for supporting your work on the tailstock end of your lathe.
●Durable to use: a rolling centre is also used to support longer workpieces where the cutting forces would deflect the workpiece excessively, reducing the finish and accuracy of the workpiece.
●High quality: the conical part is made of T10 steel, quenching hardness 55 to 60 HRC, the main body part is made of 40Cr steel, quenching hardness 45 to 50 HRC. Dust-proof seal prevents cutting dust from entering the bearing and thus extends the operating time.


Description

A centring point is a tool that has been ground to a point exactly on an axis to position a workpiece.
It has an opening angle of 60 degrees.
The primary use of a centre concentric work is produced; this allows the workpiece to be transferred between machining operations without loss of accuracy.
One part can be turned in a lathe, sent for hardening and tempering and then ground, rotated between centers in a cylindrical grinder.
A center is also used to support longer workpieces where the cutting forces would excessively deflect the work, reducing the surface area and accuracy of the workpiece.

Specifications:
Type: MT2.
Material: tool steel (T10, 40Cr).
Accuracy: 0.01
Angle: 60 degrees.
Weight: 557 g (approx. ).

Box contents:
1 x MT2 centring tip device