[2 32mm]
[2 55mm]
[2 10mm]
[2 12mm]
[2 75mm]
[1 25mm]
[2 50mm]
[1 45mm]
[1 68mm]
[1 130mm]
[2 90mm]
[1 28mm]
[1 60mm]
[1 125mm]
[1 40mm]
[1 100mm]
[1 65mm]
[1 20mm]
[2 14mm]
[2 35mm]
[2 38mm]
[2 16mm]
[2 20mm]
[2 45mm]
[2 65mm]
[2 60mm]
[2 40mm]
[2 6mm]
[1 35mm]
[1 38mm]
[1 115mm]
[1 50mm]
[1 110mm]
[1 32mm]
[1 55mm]
[1 75mm]
[2 100mm]
[2 28mm]
[2 8mm]
[1 90mm]
Professional specialises in tools in the field of construction and decoration.
We will always offer our customers the best available but the cheapest products.
We focus on tools making work easier, the choice of the professional!
|
|
|
|
---|---|---|---|
SpecificationDiameter 6 mm - 130 mm: Total length: 60 mm, diamond height: 10 mm Connection: M14 thread |
Flash tooth designFlash tooth design (20 mm-130 mm): Quickly remove chips, improve drilling efficiency and wear resistance of the hole drill. Less chipping, less heat generation, better surface quality. |
Vacuum brazed technologyVacuum Brazed Technology: Provides much longer life, faster and smoother drilling. High quality matrix steel body: provides high strength operation support. High diamond grade: No. 35/40 |
Applicable machines:Recommended machine: Angle grinder M14. Wet/dry drilling is fine, however, the use of water can extend the service life. |
|
|
|
---|---|---|
Step 1:Attach it firmly and properly to the angle grinder. Turn on the angle grinder and let the drill turn in the air to check if there is a balance problem |
Step 2:Place the drill at an angle of 45 degrees until the hole forms |
Step 3:Place the drill in the upright position. Continue drilling and the machine fluctuating along a circle |
35+40+50+68mm | 35+40+50+68+100mm+25F | 6 + 8 + 10 mm | 6+8+25+35mm | 50 mm diamond finger cutter | 20 mm diamond finger cutter | |
---|---|---|---|---|---|---|
M14 Diamond Hole Saw | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Pack of 10 | Pack of 9 | Pack of 8 | Pack of 7 | 45 mm diamond drill bits | Diamond Core Bits | |
---|---|---|---|---|---|---|
M14 Diamond Hole Saw | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |