Installation method:
1. Remove the original damaged rubber ring. If there is rubber ring residue on the outer edge of the wheel, please clean the residue.
2. Soak the new anti-slip rubber ring in warm water for 3-5 minutes and install it after the rubber ring is soft.
3. When installing, start from the side of the wheel, press the end of the rubber ring firmly into the groove on the outer edge of the wheel, and then use a slotted screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not apply too much force. It is so violent that the rubber ring is damaged.
4. If necessary, you can put a few drops of glue along the grooves on the edge of the wheel to ensure safer installation.
Specifications:
Product name: band saw rubber band.
Material:Rubber
Color: Black
Width: 34.42mm
Fit for:17/18/19 inch woodworking band saw
Quantity: 1 piece.
Package includes:
1 x Bandsaw Rubber Band
Note:
1. Transition: 1cm = 10mm
2. The real colour of the item may be slightly different from the pictures shown on the website. This can be caused by many factors such as the brightness of your monitor and lighting brightness.
3. Please allow slight manual measurement deviation for the data.