Feature(may vary by option.)

●Inch thread d1: G1/8; thread length l1: 8 mm; outer diameter d2: 14 mm
●Package unit: 10 locking screws
●Form B: seal rubber FPM (Vitron), temperature resistant up to 180 °C
●Max. Permissible operating pressure in bar: 400; recommended tightening torque in Nm: 12
●Design: steel (5.8); ultrasonic/crack-tested; galvanised, nano-passivated (silver/yellowish)

[Zollgewinde d1: G1 & 8]

Description

The dimensions of the sealing screws GN 749 largely correspond to DIN 908, but deviating from the DIN version, they have an elastic seal (rubber). This is embedded in a radial and plane-side puncture, so the sealing ring cannot be lost and cannot be squeezed out when tightening. The information on the permissible operating pressure is non-binding guidelines excluding any liability. They generally do not represent a quality commitment. Whether a product is suitable for the respective use must be checked by the user in each individual case.