Feature(may vary by option.)
●2-piece set: collet type OZ8 A according to DIN 6388 A, ISO 10897 A, EU standard 401 E – also called Kress collet diameter 1/4 inch (6.35 mm) + union nut, clamping nut for milling motors and routers from Kress, AMB industrial quality, completely hardened and ground. Circulation 0.003-0.015 mm
●Compatible with the following milling motors | grinding motors | upper chamfers | milling spindles | spindle motors: - KRESS | AMB - FM 6955 | OF 6990 E | FM 6990 E
●Advantages with our collets: made of alloy spring steel with high carbon content – robust and durable | completely case-hardened and precisely finely ground – high precision with top concentricity for optimal work results | high clamping force - no slipping of the tool or damage to the spindle | perfect fit - 100% compatible | quick and easy tool change | increased service life with reduced tool wear due to vibration. The mssdampten
●Technical data: collet – Type: Ortlieb pliers OZ | EOC – Model: OZ8 | EOC8 – DIN | ISO: 6388 A | 10897 A – EU standard: 401 E – Material: 65Mn (spring steel) – Hardness: HRC44-48 – Length: 26.0 mm – Size Diameter: 14.5 mm (measured directly above the collar – concentricity: 0.003 – 0.015 mm – span width: 0.5 mm – clamping diameter: 1.0 mm – 10.0 mm, union nut, clamping nut, thread: M17 x 1, length: 20 mm, diameter 25 mm, case-hardened and burnished
●Please select the desired sizes in the drop-down menu. Sketch(s), technical drawing(s) and size chart(s) can be found in the product images. For holding tools with a cylinder shaft. We recommend using its own union nut for each collet. Matching clamping nuts / union nuts can also be found in our Amazon shop.
[1 & 4 (6.35mm)]
[5.0mm]
Description
Collet | Collet | Chuck | Milling Holder Type OZ8 A according to DIN 6388 A | ISO 10897 A, EU standard 401 E - also called Kress collet - Bore: 1/4 inch (6.35 mm) (clamping range: 2.5-3.0 mm) + union nut | clamping nut with M17x1 internal thread in Sparset. Compatible with the following milling motors | grinding motors | upper chamfers | milling spindles | spindle motors: KRESS | AMB - FME FM 6955 | OF 6990 E | FM 6990 E and SUHNER - UAD 30 RF. Advantages with our collets: robust and durable as made of high-quality material (alloy spring steel with high carbon content) and completely case-hardened. High accuracy of fit and dimensional accuracy. 100% compatible with the above spindles. High clamping force. Holding force thanks to flat cone angle (1:10). No slipping of the tool or damage to the spindle. High precision with top concentricity. for an optimal and Clean work result - quick and easy tool change - we recommend using its own union nut for each collet as the clamping sleeve sits relatively firmly in the nut - reduced tool wear with extended service life due to vibration-damping properties. Technical data: - Type: Ortlieb pliers OZ | EOC - Model: OZ8 | EOC8 - DIN | ISO: 6388 A | 10897 A - EU standard: 401 E - Material: 65Mn (spring steel) - Hardness: HRC44-48 - Length: 26.0 mm - Size Diameter: 14.5 mm (measured directly above the collar - concentricity: 0.003 - 0.015 mm - span: 0.5 mm - clamping diameter: 1.0 mm - 10.0 mm. Available clamping diameters | Holes: Metric (metric) - 3.0 mm | 4.0 mm | 5.0 mm | 6.0 mm | 8.0 mm | 10.0 mm -inch (imperial) - 1/8 inch (3.175 mm) | 1/4 inch (6.35 mm). Packaging: individually sealed in foil with a little tool oil for corrosion protection. Sketch(s), technical drawing(s) and size chart(s) can be found in the product images.