Advantages:
- Made of 304 stainless steel, burr-free, corrosion-resistant, long service life for maximum corrosion resistance and durability.
- Safety in use, with anti-slip slot in the inner wall, can effectively increase friction and prevent wire rope from slipping.
- Widely used in hanging shade sails, floating ceilings, pipes, anchors, square fence gates, clotheslines, hanging flags, anchoring fitness equipment, etc.
Technical details:
- Product Name: Wire Rope Clamp
- Material: 304 stainless steel.
- Colour: silver.
- Size: as shown in the picture.
Package includes:
16 x wire rope clamps.
How to use:
1. Attach the 1st Clip a base width away from the dead end of the steel cable. The base or saddle should be on the live end of the rope - - U-screw on the short end. Tighten the nuts.
2. The second clip fastens as close to the loop as possible. Tighten the nuts, but not tight.
3. Attach the clips at the same distance between the first two clips. Tighten all nuts completely. Apply the first load - Check the nuts and tighten them.
Warm tips:
1. Tighten the nut with a socket wrench. Drill bits can be used, but make sure not to tighten them too tight as the wires may bend.
2. Make sure you fold a minimum of 3 inches and 3/4 inches of the cable backwards.
3. Do not use plastic coated wire rope.
4. Do not attach saddles to the dead ends of the cable. Attach the dead ends of the cable only into the U-bolt, bending will not affect the breaking strength of the lifting cables.
5. Do not reuse staples.
6. Inspect all staples regularly.