Feature

●Tyre sealant for sealing tyres with or without tubes, on steel or cast rims.
●Repair in 1 minute
●The balancing of the wheels is not affected
●Leaks are reliably sealed
●No freezing in frost or cold weather


Description

Tyre sealant - sealant for sealing tyres.

For sealing tyres with or without tubes, on steel or cast rims. For use on tyres of cars and small trucks.

Advantages of use:

• Seals the tyre in case of pressure loss within 1 minute
• The balancing of the wheels is not affected.
• Leaks are reliably sealed.
• No freezing in frost or cold weather.

Application:

1. Possibly Remove objects stuck in the tyre.
2. Turn the wheel until the valve is at the bottom and deflate the air from the tyre until the rim touches the ground.
3. The temperature of the sealant must not be less than +15°C. In the cold season, heat the container on the heater fan of the electric vehicle. Never heat the container over an open flame.
4. Shake the container vigorously.
5. Screw the connection piece of the plastic hose of the container firmly onto the thread of the valve of the tyre.
6. Hold the container with the cap facing up.
7. Remove the protective lid of the cap, press the cap and hold it at the same time.
8. Fill the contents of the container completely into the tyre.
9. Fill the tyre to 80% of the prescribed tyre pressure.
10. Only after 1-2 km of driving can the tyre be filled to the full prescribed tyre pressure.