Feature(may vary by option.)

●VERWENDUNG - Bohrkrone 68mm GRAFF wird zum Trockenbohren von Beton, Ziegel, armierter Beton, Natur- und Kunststein, Porenbetonstein verwendet.
●Operating regulations – This diamond drill bit is only used in shock-free drilling mode. In order to avoid clamping the countersinks, you must perform light rotary movements with the hammer drill during operation.
●Centre drill – This can drill consists of a pilot drill and SDS-Plus adapter. The pilot drill is clamped in the adapter using an Allen screw. To facilitate the work, you need to remove the pilot drill after passing the first 5 mm of the processed material.
●Special Turbo Segments – GRAFF socket countersink has the laser-welded Turbo diamond segments. This ensures a long service life and allows you to work with hard concrete.
●Technical features: diameter: 68 mm, mount: M16, including pilot drill and SDS-Plus adapter.

[82 mm]




[68 mm]





Description

1.1.
2.2.

Graff Diamond Drill Bit 68 mm

Diamond drill bit graff is a special tool for drilling concrete, brick, reinforced concrete, natural and artificial stone, aerated concrete stone. Drill bit is a shell-like device with a shaft and a centring drill on whose cutting edge diamond segments are located.

Features:

  • Type: Diamond core bit.
  • Working materials: Concrete, brick, reinforced concrete, natural and artificial stone, aerated concrete stone.
  • Diameter: 68 mm.
  • Shaft mount: SDS Plus
3.3.

4.4.

Graff drill bit has a turbo diamond segment, which is attached by laser soldering. This ensures a long service life and allows you to work with hard concrete.

Diamond drill bit.

Diamond core bit Graff consists of the following parts:

- Cylindrical tube It is the frame to which the teeth are attached. The diameter of the tube determines the size of the hole to be drilled.

- Cuts with soldered segments. This part of the tool determines its service life. The better the segment, the longer you can use the tool.

- SDS-Plus shaft and pilot drill. There are also diamond teeth at the end of the drill.

1.1.

2.2.

3.3.

4.4.

Diamond crown consists of a pilot drill and SDS plus adapter. The pilot drill is clamped in the adapter with the help of an Allen screw.

The can drill is equipped with a pilot drill which is securely fixed in a special unit with screw fixings. With the pilot drill you can position the electrician tool in the right direction. A blunt drill can be replaced.

The SDS Plus drill shaft is the most common shaft type used in combination with hand-held hammer drills.

The drill bit is very convenient to use. It has holes on the sides, which helps to retrieve concrete after drilling.

Graff hole drill 68 mm is used in shock-free drilling mode of holes in concrete, masonry, natural and artificial stone, aerated concrete stone with the hammer drill.

1. 2. 3. 4.
Graff Speed Cutter 125 mm Graff Termit 125 mm Graff Black 125 mm Graff Drill Bit 68 mm
Diameter: 125 mm. 125 mm. 125 mm. 68 mm.
Working materials: Wood, gas silicone, plasterboard, plastic, veneer, laminate, covering board, fibreboard, chipboard. Thin and clean cut of wood, plasterboard, plastic, veneer, laminate, covering board, fibreboard, chipboard. Sheets, metal pipes and profiles, reinforcing steel, aluminium, cast iron. Masonry, natural stones, sandstones, artificial stones, concrete, marble.
Shaft mount: - - - SDS Plus