Feature(may vary by option.)
●Optimal protection: our condensation drain reliably protects your caravan from condensation streaks and ice formation. The water dripping from the chimney cap of the heater is safely drained away from the vehicle.
●Easy installation – the assembly is done in under 3 minutes. No drilling or gluing to the motorhome necessary! Our drain is attached behind the chimney lid with the existing original screws.
●Universally suitable: the drain is suitable for all fireplace covers with a hole spacing of 96 mm such as TRUMA and ALDE fireplace covers (ZR 80 Truma Combo, Hybrid), part number: 36151; 34000-33500
●Flexible material – the high-quality material is flexible, weather-resistant, UV-stable and durable. Due to its elasticity, it will not break under heavy use or damage your motorhome.
●Suitable for Renault Master, Fiat Ducato, Citroën Jumper, Peugeot Boxer, Mercedes Sprinter, VW Crafter, Ford Transit, Opel/Vauxhall Movano, Ram ProMaster, Hymer, Carthago, Dethleffs Globetrotter, Etrusco, Niesmann + Bischoff, Weinsberg, Frankia, Carado and many more with a fireplace lid with 96 mm.
[black 96mm Lochabstand]
Description
SOLIDfy - Condensation Drain 96 mm for Truma and Alde Heating on the Motorhome, Drain for Lid, Chimney Cover, Chimney Cap, Camper Caravan Box Truck
The pollution caused by condensation has finally come to an end. With our condensation drain, you can reliably protect your motorhome from condensation streaks and ice formation. The water dripping from the chimney lid of the heater is safely drained away from the vehicle. Our drains are easily mounted under the chimney lid with the original screws:
1) Unscrew the chimney lid.
2) Attach condensation drain to the back of the chimney lid.
3) Screw on the chimney lid again.
4) Done!
The assembly is done in just a few minutes and without drilling or gluing. Our condensation drain fits all fireplace covers with a hole spacing of 96 mm such as the TRUMA and ADLE fireplace covers (ZR 80 Truma Combo, Hybrid).
Part number: 36151; 34000-33500.
Important: Determine the correct measurement:
Measure the distance between the screw heads (required dimensions 96 mm), as there are also smaller chimney covers with 72 mm hole spacing (e.g. Truma Vario Heat).
When not installed, our condensation drain is flat and has a hole spacing of 112 mm, by attaching our drain to the chimney lid (96 mm), the required curve is created for a perfect drain. This is not a defect, but so intentional.
The flexible material is both weather and UV resistant. Due to its elasticity, it will not break under heavy use or damage your motorhome.
Thanks to the attachment under the original chimney lid, you dont need to worry about thieves.
Package includes:
1 x SOLIDfy condensation drain 96 mm for Truma and Alde heating on the motorhome