Feature

●2 x 50 Watt 6 Ohm + 4 branch terminals load resistor for LEDs/SMDs
●For cancelling triggered error messages by lamp monitoring when converting to LEDs/SMDs
●High-quality workmanship, easy to install thanks to the approx. 25 cm long cable (per side) and the enclosed branch terminals
●Note: the resistors get hot, there must be no contact with plastic, it is recommended to mount the resistors freely hanging or attach them to metal
●Suitable for LED in daytime running light, reverse light, turn signal, fog light


Description

Have you retrofitted LEDs and receive an error message? With us you will receive 2 x 50 W 6 Ohm with extra long cables (approx. 25 cm per side) to simplify installation + 4 power thieves / branch terminals load resistors for cancelling error messages after conversion to LEDs. Suitable for the use of standard halogen lamps from 21 Watt to 55 Watt to simulate the necessary power consumption and thus suppress the error message. - Install resistors only after eliminating a passing error message - An illustrated assembly sketch is included in the delivery -