Feature
●Sturdy and Durable Our self-priming pump 12V is made of solid ABS, which ensures maximum strength and durability, soft rubber assembly, stable and durable equipment. Easy heat dissipation through two large holes on one end of the pump body
●Automatic pressure switch: built-in pressure switch, when you open or close the faucet or nozzle, it will automatically open and close. When the water outlet pressure is large enough, the pressure switch stops automatically. And run again when the pressure drops.
●Auto Shut-Off:When the water outlet of the pump is completely blocked (no water loss and the pressure reaches the maximum value of 11kg.f/cm2), the power supply will be automatically interrupted and the pump motor stops. When the water outlet is opened, the pump starts working again.
●Small and Practical Design The 12V self-priming pump is small and practical, easy to connect, extremely efficient, very low current consumption and high capacity, suitable for many occasions. It can be widely used for garden sprinklers, weed control, showers, balcony spray system, boat taps, motorhome or motorhome, and can also be used in agriculture.
●Widely Used This kind of product can be applied on occasions that require energy saving and frequent switching, such as for car washing, solar energy water, remote control water equipment, etc.
Description
Are you looking for a convenient and practical water pump for your plants on the balcony or for your caravan?
This small and functional water pump from Wakects is ideal for you.
This self-priming water pump can easily lift water onto the roof of the house. Thanks to the built-in pressure switch, the pump switches off automatically when pressure build-up, for example when closing the tap, and automatically re-on when you open the tap again. It can be widely used for garden watering, weeding. aquariums, balcony fog systems, showers, boats, caravans or taps for motorhomes.
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|---|---|---|
|
The body is made of solid ABS and is sturdy and durable for long time use. |
The water inlet and outlet interface is connected to a PE or PU silicone hose. |
The mounting feet are made of rubber instead of hard plastic, which reduces vibration, stable and durable. |
Instructions:
The direction with a small arrow on the water pump is the water outlet. The wires are not divided into positive and negative poles. The pump can be positioned in any direction.
Box contents:
1 x self-priming pump
Use:
Easy to install, but professional installation is highly recommended. The water input end must use filter, the power supply must form a full set. The pressure switch of the product is built-in and cannot be adjusted. Please note that the new type and old type of this product are sent at random. make sure you that you do not mind before you order.