Garden Pump Stainless Steel 2.2 KW 11 Bar Centrifugal Pump with Pressure Switch Pump Domestic Waterworks

Garden pump stainless steel 2.2 kW 11 bar, centrifugal pump with pressure switch, pump domestic water system

Attention:

This pump is only suitable if a check valve or foot valve is present at the bottom of the water at the base of the suction line (e.g. in the case of a well/cistern). We do not recommend the check valve in front of the pump or at the top of the intake line and advise against purchase. !

6000 L/h 2.2 kW with adjustable pressure switch/dry run protection

Max. Pressure: 11 bar / Max. Suction height: 8 m at 1 inch / max. Water temperature: 35°C

10 x stainless steel bucket wheels with stainless steel shaft and plastic coated for smooth running 68 dB

Pressure switch with LCD display, on/off pressure adjustable + dry run protection function

The cable or the consumer on the pressure side should have at least 1 inch, otherwise you also need a pressure expansion vessel (membrane boiler) in front of the pressure switch. To avoid backup pressure in the consumer line and a power reduction.

The pump should be placed near the fountain hole to ensure the max. suction height.

Electronic pressure switch, dry run protection up to 2.2 kW, pressure monitor

On and off pressure adjustable, integrated dry run protection and brass check valve at the output

Technical data:

Input voltage: 220-240 V. Maximum operating pressure: 10 bar

Working and switching capacity up to 2.2 kW. Frequency: 50 - 60 Hz

Time adjustable for automatic restart

Displays the current pressure in the display during operation. !

Also suitable for 380 volt pumps via contactor, see wiring diagram in pictures

Maximum temperature: 60?

Power consumption: 10 A

Protection class: IP54

Dry run protection: Turns off the pump when there is a lack of water

Check valve: Prevents pressure impact effects

Connection: 2 x 1 inch male thread

Waterproof housing IP 54