Feature

●Length: the recommended speed is 1500-3500 rpm, the pump stroke is about 1.5 meters to 3 meters, and the flow rate is about 15L/min to 30L/min.
●Material The miniature oil pump is made of high quality plastic, safe and environmentally friendly, non-toxic and harmless, strong and durable. Has high hardness and good sealing.
●High performance: the operating temperature range of the oil pump is 5°~49°C and can be used in most cases. Note: It is recommended to use 1500-3500 at speed. Note: The recommended speed is between 1500 and 3500. When using, make sure that the hose is sealed at the inlet of the oil pump connection and the length of the hose must not exceed 2.75 metres (9 feet).
●Convenient to Use and Store Install the drill chuck to use the electric drill pump, easy and convenient to use. Compact and lightweight design, portable and easy to store.
●Wide Application Works great with most electric hand drills. Simply connect the water pipe with the hose clamp and insert the electric drill to use it. The electric drill pump is suitable for pumping liquids such as water, oil, diesel, etc. It is also suitable for pools, aquariums, fountains and can also be used frequently for cleaning houses, etc.
●Easy Operation After starting the oil pump, it must be observed whether a certain liquid in the oil inlet line is sucked into the pump within 15 to 20 seconds. If not, you need to check whether the oil inlet pipe is installed correctly on the oil inlet pump. Note: Do not let the oil pump run dry!


Description

Mesee oil pump, portable self-priming electric drill pump.

Specification:

Material: plastic.

Colour: black.

Operating temperature: approx. 5-49°C (41~120°F).

Inner tube diameter: approx. 15mm

Gear Shaft Diameter: 8mm Round Shank

Direction of rotation: clockwise.

- Large flow, stable performance and high efficiency, easy installation. Compact and lightweight design, portable and easy to store.

Usage steps! !

1. Please add a small amount of lubricating oil into the inlet of the water pump before use to achieve the best starting effect.

2. Install the inlet and outlet pipes correctly (oil inlet on the right side and oil outlet on the left side), and the reverse operation of the water and oil pump leads to the failure of the pump. Please make sure the inlet pipe is tight, the length of the pipe should not exceed 2.75 meters.

3. Connect the electric drill to drive the oil pump. Please observe whether a certain amount of liquid is sucked into the pump within 15-20 seconds at the start of operation through the oil inlet line. If not, please check whether the oil inlet pipe is installed correctly.

4. If the oil pump does not start, check that the inlet and outlet hoses are not bent or clogged.

5. Please rinse the pump with water after each use to extend the life of the product.

Warning:

Do not let the pump run backwards.

Do not operate the main drill pump and do not let the power cord fall into the water while standing in the water, always stand on dry ground and keep all codes dry.

Package includes:

1 x drill pump.

2 x hose clamps.

2 x connectors.