Feature

●Chromatic C240 WF Sensoflat Submersible Pump
●? Outer casing made of impact-resistant plastic
●? Chromatic submersible pump with jacket cooling
●? Suitable for clean and slightly dirty water with solid proportions up to 3 mm grain size
●? Automatic suction with low water level from 5 mm to prevent larger flooding in rooms without pump shaft or floor drain
●? Emergency use in case of flooding
●? Sufficient engine cooling ensures even at low water level (slurry operation)


Description

Chromatic C240 WF Sensoflat Submersible Pump

? Chromatic submersible pump with jacket cooling.
? Suitable for clean and slightly dirty water with solid proportions up to 3 mm grain size.
? Automatic suction with low water level from 5 mm to prevent larger flooding in rooms without pump shaft or floor drain.
? Emergency use in case of flooding.
? Sufficient engine cooling ensures even at low water level (slurry operation).
? Design with sensor switch.
? Max. Temperature of the pumping medium 35 °C, short-term up to 60 °C.
? Stainless steel motor housing.
? Outer casing made of impact-resistant plastic.
? Pump: single-stage centrifugal pump with vertical pressure connection R 1.1/4 inch.
? Impeller: open multi-blade wheel, free passage 3 mm.
? Motor: pressure-waterproof, medium flooded motor.
? Insulation class F, protection class IP X8.
? AC versions with thermal sensor for temperature monitoring in the winding.
? Shaft/bearing heavily sized chrome steel motor shaft, permanently lubricated rolling bearings.
? Shaft seal with triple shaft seal and ceramic-coated sealing surfaces.
? Connection cable: H07 RN8-F 3G1.
? Automatic level control.

Delivery: pump with double sleeve R 1.1/4 inch female thread on the pressure connection, 10 m connection cable and power plug.
Further information: engine power P1: 0.50 kW, motor power P2: 0.25 kW, voltage: 230 V, nominal input: 500 W, pressure connection: R 1.1/4 IG inch solid state size (max): 3 mm discharge head (max. ): 8 m flow rate (max. ): 10 m³/h. Weight: 5.4 kg. Brand: HOMA