[DC12V 40 U & min]
[DC6V 150 U & min]
Specification:
Item Type:DC Worm Gear Motor
Material: zinc alloy, copper.
Purpose: industrial drive device
Output shaft diameter: approx. 6 mm / 0.2 inches.
Output wavelength: approx. 15 mm / 0.6 inches.
Shaft type: D type
Speed adjustment: adjustable.
Direction: CW and CCW
Cable length: approx. 230 mm / 9.1 inches.
DC 6V Parameter:
Reduction ratio (change ratio) 40 65 90 150 200 260 340 600 1000
No load current MA ≤100 ≤100 ≤100 ≤100 ≤100 ≤ 100 ≤ 100 ≤100 ≤100
Idle speed rpm 150 90 66 40 30 23 18 10 6
Nominal rotation kg.cm 0.2 0.5 0.7 2 5.3 6.7 9 15.9 26.5
Rated RPM 120 70 51 30 22 18 15 7.5 4
Rated current A ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6.
Maximum torsion kg cm 0.9 1.6 2 7.5 10 13 18 30 45
Blocking current A 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 DC 12 V. Parameters:
Reduction ratio (change ratio) 40 65 90 150 200 260 340 600 1000
No-load current MA ≤60 ≤60 ≤60 ≤60 ≤60 ≤60 ≤60 ≤60 ≤60 ≤60.
Idle speed rpm 150 90 66 40 30 23 18 10 6
Nominal rotation kg.cm 0.2 0.5 0.7 2 5.3 6.7 9 15.9 26.5
Rated RPM 120 70 51 30 22 18 15 7.5 4
Rated current A ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6.
Maximum torsion kg. cm 0.9 1.6 2 7.5 10 13 18 30 45
Blocking current A 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
Application:
Wiring:
Red: red, connection to the positive pole of the motor+.
Black: black, connection to the negative pole of the motor.
Green: green, connect to the grounding wire of the sensor (5-12V)
Blue: blue, connection to sensor power supply + (5 – 12 V).
Yellow: Signal A output point (11 pulses)
White: Signal B output point (11 pulses)
Package list:
1 x gear motor.