[E3 for Canon Fuji Olympus]
[DC0 for Nikon MC-30A]
[DC2 for Nikon MC-DC2]
[N3 for Canon RS-80N3]
[S2 for Sony RM-SPR1]
[UC1 for Olympus RM-UC1]
[L1 for Panasonic DMW-RSL1]
[S1 for Sony RM-L1AM]
Pixel Remote Shutter Release
The remote control has an LED, a release button and an operating mode selector switch. Here you can set whether you want to trigger single image, continuous picture, bulb mode or time offset.
The shutter release on the transmitter is two-stage: focus/autofocus and triggering.
The receiver also has a shutter release button (the receiver can be used as a wired shutter release remote).
The receiver can be easily plugged into the holder provided for the flash and is connected to the camera with the included USB cable. If the flash is used at the same time, it is certainly no problem to simply hang the transmitter down or lie next to it due to its low weight.
Top self-timer, easy to use
Especially for self-timer motifs, this is the optimal alternative for the 2-10 second self-timer mode of the camera. You have enough time for the desired picture composition.
The best part is that you are also in the picture in family and group photos. The remote control is also so small that you can let it "disappear" in your hand if you want to be with you in group photos.
Good for family parties and self-timer; clearly recommend the Pixel remote shutter for night shots / sports photography / to use in animal photography.
With BULB, press the shutter button after setting and then release until you press it again to shoot the picture.
The handling is also very easy and it is so light and small that it fits in any photo bag/handbag.
Transmitter (L × W × H): 9.7 cm x 3.3 cm x 1.5 cm.
Receiver (L × W × H): 6.6 cm x 3.7 cm x 2.8 cm.
Package includes:
1 x transmitter.
1 x receiver.
1 x camera connection cable.
1 x user manual.
Note: Battery not included.