Feature

●Viewfinder holder for all 60mm viewfinder and mini guidescope up to 60mm opening - fits standard finder shoes.
●Inner diameter of the pipe clamps is 80 mm – suitable for all 50 mm and 60 mm viewfinder and guide scope.
●Thanks to six high-quality adjustment screws, they have perfect adjustment stability and optimum stiffness.
●You can put tubes from 54 mm diameter up to 78 mm diameter in the holder and adjust them.
●The adjusting screws have hard plastic tips to prevent the viewfinder from scratching.

Description

Viewfinder holder for all viewfinder telescopes with 50 mm and 60 mm opening
The viewfinder holder fits in all popular search shoes. You can remove your old holder and replace it with the SUHA60 in seconds. The viewfinder holder offers you some advantages.
- The viewfinder is significantly better adjusted and the adjustment position does not change. This is important if you use the viewfinder as a mini-guiding scope. Simple holders with a rubber ring on the front give gradually and the tracking becomes inaccurate.
- The build-up viewfinder holder puts the viewfinder into a comfortable position - a little further away from the tube. This is more convenient to search, especially with straight viewfinder telescopes.
- The solid workmanship of the six adjustment screws allows for very precise adjustment. Plastic tips are embedded in the front screw ends. These hold the viewfinder and prevent scratches.

Data:
Suitable for: all viewfinders with tubes from 54 mm to 78 mm diameter - ideal for viewfinders with 60 mm opening
Diameter of the two clamps: 80 mm inside
Base: Vixen/Skywatcher Level Dovetail - for all standard viewfinder shoes