[6SP01 Schwarz]
[6S01 Schwarz]
[8P01 Weiß]
[6S01 Weiß]
[8G01 Weiß]
[11PM01 Schwarz]
[7G01 Weiß]
[8G01 Schwarz]
[8P01 Schwarz]
[x Schwarz]
[7P01 weiß]
We have been focusing on replacing iPhone screen for 10 years and dedicated ourselves to supporting our customers in repairing their iPhones.
Purchase with satisfaction:
1. Each screen is tested and tested before shipping.
2. We offer our customers a complete repair tool and an instruction video with all steps to repair the screen perfectly.
3. We have a professional technical team that gives you professional instructions for installation.
Colour: iPhone 8 black (4.7 inches). Note: only for 4.7 inch iPhone 8 Not for iPhone 8 plus. Support model: A1863, A1905, A1906. Box contents: 1 x LCD screen replacement for iPhone 8 (black), 1 x replacement repair tool kit, 1 x 0.2 mm tempered glass screen protector for iPhone 8 screen, 1 x water-repellent adhesive, 1 x repair instructions with instruction video link.
|
|
|
|
---|---|---|---|
High resolution |
High sensitivity |
Hard tempered glass, anti-water, oil and fingerprints |
3D touch |
|
|
|
|
---|---|---|---|
1. Watch instructions videoOpen the item description to watch the video. |
2. Disassemble the old phoneRead the instructions carefully and follow the instructions to disassemble your old phone. |
3. Test the new screenTake out the new screen, connect the cables to turn on and test the screen before installing it. |
4. Install the new screenFollow the instructions to install the new screen step by step. |
|
|
|
|
---|---|---|---|
Do it yourself |
Save time |
Save money |
Privacy protection |
When installing the phone, the display data cable may detach from its connector. This can lead to white lines or a blank screen when you turn the phone on again. If this happens, simply connect the cable and turn on the phone. It is best to turn on the phone by removing the plug of the battery and plugging it back in. Besides, the ribbon cable can detach if the LCD port is not fully installed. Please try to reinstall the ports several times and reset the phone by pressing the power and home button for at least 15 seconds at the same time.
This is because the digitizer cable may lose connection if it is not plugged in. Turn off the phone, clean the connector on the motherboard, reconnect all the cables, perform a hard reset of the phone and turn it on.
Check the LCD screen to make sure the flex cables are in order and there are no deposits on the connectors. Then connect all the cables and leave the phone in a dry environment overnight and turn it on the next day.
The home button has 2 connection points, one is connected to the metal plate and the other with the logic card. Please make sure both are fully connected. You also need to turn on the phone to activate the function of the home button.