Feature

●this POE Splitter is suitable for household IP camera with Micro USB Plug 5V power Port
●Power output port: micro USB power plug
●Supports the IEEE 802.3af the Power over Ethernet PoE Switch
●Support 48V Unsolicited Power Over Ethernet PoE Switch. Support 48V Unsolicited Power Over Ethernet PoE Adapter
●This POE splitter must be connected with POE Switch or 48V POE Injector so that it can supply power to a connected Raspberry Pi or other Micro USB Port IN DC 5V cameras


Description

Note:
this POE Splitter is suitable for household IP camera with Micro USB Plug 5V power Port.
Power output port: micro USB power plug.

RJ45 female INPUT Port:
Supports the IEEE 802.3af the Power over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Adapter

Specification:
Compliant with IEEE802.3af
Insulation: 2.5 kV.
Power Input: DC44~57V.
Power output: DC5V 2.4A.
Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data output port: RJ45 male.
Power output port: micro USB power plug.
Data transfer rate: 10/100Mbps.
Devices will be detected before poe input
Power pin: supports both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-).
Body size: 80 x 27 x 22 mm.
DC cable length: 165 mm.
RJ45 Modular Plug cable length£º155mm
Weight: 55g

Item Included:
1 x 48 V to 5 V active PoE splitter (micro USB power plug).

If there is no network link, please check that if your POE switch has a separate port setting, and set it at manually.
Some switchs wouldnt provide network signal when the automatic speed negotiation was turned on for that specific port in the switch. After manually setting the ethernet port that the POE splitter was connected to 100M it will be working.