[0 | 5 Liter]

[1 | 5 Liter]

[5 Liter]

Lahti 3 TAAJUUS Sauna Wood Maintenance Cleaner
Is a modern, ready-to-use cleaner specially developed by us for weekly maintenance care. It was important to us to develop a sauna maintenance cleaner that not only cleans effectively and well, but also very gently handles the material, i.e. your sauna wood. Something that cannot really be achieved with conventional cleaners.
Our cleaners are label-free (without red warning triangles).

Areas of use:
Laht 3 TAAJUUS is a sauna wood maintenance cleaner for the complete sauna, especially for sauna benches and other untreated wooden surfaces. Surfaces cleaned with Lahti 3 TAAJUUS are optimally prepared for subsequent treatment with the SaunaHolz protective and care product Lahti 2 OULUJÄRVI or Lahti 4 INARIJÄRVI and can thus be permanently protected against staining.

Preparation
The surface must be dry and clean from coarse dirt before cleaning with Lahti 3 Taajuus.

Workmanship
Lahti 3 TAAJUUS is undiluted and evenly applied to the surfaces to be cleaned. After 10-30 seconds exposure time, dirt can be cleaned with our special blue sponge puck, etc. can be removed. Then wipe the surfaces with clean water and sponge and dry. The processing temperature should not be less than +5 °C. Do not use in blazing sun or on hot surfaces. Do not allow cleaner to dry.

Dosage.
Depending on the surface and absorbency, approx. 30 - 90 ml/m² required.

Further processing and protection.
Before further processing or protection with Lahti 2 OULUJÄRVI, the surface should dry out.

Cleaning the work tools.
Wash sponges and cleaning device with water.

For questions and competent answers, we are happy to assist