Feature(may vary by option.)

●Wide applications: MEIRIYFA USB type C hardware kit step-down cable is applicable to almost all GPS navigators, tachographs, electronic dogs, etc. Its input range is 12~24V, output voltage is 5V, output current is 3A, and it has USB C input power port, which makes charging easier.
●[High Safety Standard]: The USB Type-C hardware kit cable can convert the vehicles 12V to 24V voltage into 5V voltage, thus supporting longer parking monitoring or delayed photo processes. The built-in protection device can prevent the equipment from overcurrent and overheating.
●[Low Voltage Protection]:It has battery voltage automatic detection and low voltage protection functions. If the voltage is lower than 11.6 V or 23.6 V, the power output can be automatically switched off. It is compatible with large and small cars to ensure that the car can start normally.
●[ACC STEP DOWN LINE]:Automotive Positive Pole (BAT+Yellow Line), Automotive Negative Pole (GNT Black Line), Automotive ACC (ACC Red Line). When the vehicle engine is off, the dash cam automatically switches to parking mode. When the vehicle engine is on, the driving camera switches to normal recording.
●[24-Hour Monitoring]: Connect the fuse box power supply to the DASH CAMs hardwire kit. The DASH CAM can power the on-board camera even after switching off the vehicle, making 24-hour parking monitoring more convenient.

[USB Type C]




[Micro USB]




[Mini USB]





Description

MEIRIYFA Dash Cam ACC three lead hardwire kit is an energy management device that powers the dash cam from the car battery through the fuse box. Even after the engine is switched off, the DASH CAM can continue to be operated to use 24-hour parking monitoring.
Features:
Input voltage: 12 ~ 24 V. Output voltage: DC 5 V. Output current: DC 3A. Automotive positive pole: (BAT + yellow line). Vehicle cathode (black GNT wire). Vehicle ACC (red line ACC). Total length: 3.5 m/11.5 ft (input 0.8 2,7m).
The yellow wire (BAT+) must be connected to a constant fuse. Black wire (GND) must be connected with metal screws or screws to prevent electric shock. The red cable (ACC) must be connected to the fuse box ACC