Feature●Z-002 modules (CC2530 PA CC2591)●UART to Zigbee firmware as default●Supporting Zigbee2007/Pro(Z-Stack 2.5.1a), Z-Stack 3.0.2●Max. 400 m transmission distanceDescription
Customised feature:
The default firmware on Z-002 is UART to Zigbee. If you want to get yourself firmware flashed before shipping, please send us link to your hex file.
2 x H2 Z-002 (TICC2530 CC2591) H-2 Technik UG.
Technical data:
- PCB layers: 4.
- Size: 36.0 x 25.6 mm.
- Material: RF special materials.
- Receiver sensitivity: -96 dBm.
- Input DC viltage: 2.1 ~ 3.3 V.
- Antenna: 2.4G antenna with SMA interface.
- Transmission rate: max. up to 250 kbps.
- Transmission distance: 400 m (with 3 dBi antenna).
- Power consumption: Receiving status <50mA, Emiting status<110mA
- Supporting Zigbee Protocol: Zigbee2007/Pro(Z-Stack 2.5.1a), Z-Stack 3.0.2).
- Support UART configuration commands
- Transparent serial data transmission
Default firmware (UART to Zigbee)
- UART default parameters: 38400 (baud rate), none (parity bit), 8 (data bits), 1 (stop bit).
- Support AT Command (e.g. Setting or Querying )