Feature

●Jumper details: Jumper A, B are used to control the audio effect of the bass range. A for the lower limit and B for the upper limit of the bass audio range. On some speakers, the speaker will show distortion when the bass is turned up too much
●In this case, we remove the jumper cap from Jumper A to limit the extremely low bass and reduce distortion. When we remove the cap from Jumper B, the bass is increased while the cap of Jumper B is turned on, and the bass is reduced. Jumpers C and D are used to control the height range. When the cap of Jumper C and D is put on, the treble sound is the loudest
●If only cap C is on, the treble sound is lower. When only the cap D is put on, further down. When both caps are removed from C and D, no treble sound is heard. (In general, you would find your best sound effect sooner or later with the four jumpers. Anyway, all effects still depend on your actual test


Description

How to use the splitter board:

First connect the connection according to our above diagram (highs, low, input), connect it to the speaker, connect the air gap, and you can listen to music while optimising.

Normally we use Jumper A and let B run idle. For jumpers C and D: we need to hear the actual effect of the highs. A general formula is: A + D = better bass; A + C = clear treble and bass; A + CD = clear treble and bass (the overall effect tends to high); AB + CD = medium frequency. If the bass effect is unnecessarily high, we can remove cap A. Please tweak until you think the sound is best, and then attach the board to your speaker unit.

Technical data:

Model: YLY-2088

Power: 400W or less

Resistance: 4-16 ohms.

Frequency: adjustable.

Color: As picture show

Material: ABS

Size: 7 x 5 x 2.5 cm.

Package contents:

2 x speaker frequency dividers.

Only the above package content, other products are not included.

Note: Due to the light and screen difference, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.