Feature

●In this case, we remove the jumper cap from Jumper A to limit the extremely low bass and reduce distortion. When we remove the cap from Jumper B, the bass is increased while the cap of Jumper B is turned on, and the bass is reduced. Jumpers C and D are used to control the height range. When the cap of Jumper C and D is put on, the treble sound is the loudest.
●Jumper details: Jumper A, B are used to control the audio effect of the bass range. A for the lower limit and B for the upper limit of the bass audio range. On some speakers, the speaker will show distortion when the bass is too turned up.
●If only cap is C, the treble sound is lower. When cap D is put on, further down. When both caps are removed from C and D, no treble sound is heard. (Generally, the four jumpers would sooner or later find your sound effect. Anyway, all effects always depend on your actual test.)


Description

Frefgikty How to use the splitter board:
First connect the connection according to our above diagram (highs, low, input), connect to the speaker, close the air gap, and can listen to music while optimising.
Normally we use jumper A and leave B idle. For jumpers C and D: we need to hear the actual effect of the highs. A general formula is: A + D = better bass; A + C = clear treble and bass; A + CD = clear treble and bass (the overall effect tends to high); AB + CD = medium frequency. If the bass effect is unnecessary, we can remove cap A. Please optimise and then attach the board to your speaker unit.
Technical data:
Model: YLY-2088
Power: 400W or less
Resistance: 4-16 ohms.
Frequency: adjustable.
Color: As picture show
Material: ABS
Size: 7 x 5 x 2.5 cm.

Package contents:
2 x speaker frequency dividers.

Only the above package content, other products are not included.
Note: Due to the light and screen difference, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.